2013年9月4日星期三

thickness of spacer double row tapered roller bearings are preloaded.


Double row tapered roller bearing outer (or inner) as a whole. Two inner (or outer) face close to the middle spacers, clearance by the thickness of the spacer to adjust, and can also be used to adjust the thickness of spacer double row tapered roller taper roller bearing are preloaded.
Tapered roller bearings mainly bear radial diameter and axial joint load. Load thickness of spacer double row tapered roller bearings are preloaded. capacity depends on the outer ring raceway angle, angle greater carrying capacity. These bearing manufacturer are separable bearings, rolling bearing according to the number of rows into single row, double row and four row tapered roller bearings. Single row tapered roller bearing clearance to be adjusted during installation the user; double row and four row tapered roller bearing clearance in the factory according to user requirements is given, not to be user adjusted.
Tapered roller bearings have tapered inner and outer ring raceway, Tapered Roller arranged in between. All conical surface projection lines are the same point on the bearing axis together. This design makes tapered roller bearings particularly suitable for combined (radial and axial) loads. Most of the axial load bearing capacity is determined by the contact angle α; α angle increases, the higher the axial load capacity. Angle size calculation factor e; e larger the contact angle the greater the bearing axial load greater applicability.
Tapered roller bearings are usually separated type, namely the belt roller and cage assembly of inner components can be composed with tapered conical outer inner (outer) installed separately.
Tapered roller bearings are widely used in automotive, mill, mining, metallurgy, plastics machinery and other industries.

没有评论:

发表评论