Crossed roller bearings internal structure was 90 ° roller arranged perpendicular cross

Crossed roller bearings internal structure was 90 ° roller arranged perpendicular cross,
Spacing between rollers fitted retainer or isolation block to prevent roll-tilt roller mill mutual observation between child, effectively preventing the increase in rotational torque. Further, one of the rollers does not occur or the latch-up phenomenon of the contact; same time as the inner and outer ring is a split structure, the gap can be adjusted even if the preload is applied, can be obtained with high accuracy rotation.
2, the operation simplifies installation
Divided into two parts of the outer or inner ring, and after loading the roller holder is fixed together, so when you install operation is very simple.
3, bear large axial and radial loads
Because the rollers are arranged vertically spaced retainer by 90 ° to each other in a V-shaped groove raceway, this design makes cross roller High speed Spindle can withstand higher radial load, axial load and moment load and all load direction.
4, substantial savings in installation space
Small, thin structure of particular cross-roller lubricating oil inner and outer rings is a minimum size is close to the limit of small size, and has high rigidity, so the most suitable for the joints of an industrial robot or a rotary portion of the rotary machining center versatile table, robot rotating part, precision rotary tables, medical equipment, measuring instruments, IC manufacturing devices.
High 5 speed capability
Reducing the length of the shaft 6 and the processing cost, result in a limited thermal expansion changes the geometry

Ball bearings, roller bearings and needle roller bearings

Ball taper roller bearing  roller bearings and needle roller bearings. High speed, load is small, requiring high precision rotation should use ball bearings; load is large roller bearings should be selected; loading large radial dimensions should be selected when they restricted needle bearing. Radial bearing rings of the inner and outer ring, inner ring and the shaft sleeve and often with the shaft rotates, the outer ring mounted in the bearing bore. Rolling rolling along the raceway rings, separated by the cage, to avoid friction between. Thrust bearings are divided into a tight circle and live ring in two parts. Tight circle and sleeve tight, live ring bearing in the bearing housing. Rings and rolling body with high strength, good wear resistance bearing steel, surface hardness after quenching should reach HRC60 ~ 65. Cage mostly made of mild steel stamping, and some copper alloy, bakelite cloth or plastic. Basic types listed in the table produced in China basic types of rolling bearings. Various types of rolling bearings is divided into B, C, D, E, G5 a precision. B is the highest accuracy level. G is the general accuracy level, the most common. High speed, there are strict requirements for precision rotation of the spindle, high precision bearings should be used, such as precision lathes, milling machines, boring, grinding grinding, aircraft engine, turbocharger, precision instruments selected C, D grade; coordinate boring machine, High-speed grinding elect B, C grade. Rolling easy maintenance, reliable, good starting performance at moderate speeds higher carrying capacity. Compared with the sliding bearing, radial bearing a larger size, poor damping capacity, high speed, low life sound bigger. Rolling in the radial bearings (mainly radial force) usually consists of inner and outer rings, rolling and rolling element cage four parts. Inner sleeve in the journal together with the shaft rotates, the outer ring mounted in the bearing bore. In the inner and the outer periphery of the inner periphery of the outer ring are formed with raceway. When the relative rotation of the inner and outer rings, the inner and outer rings of the rolling element raceway, are separated by the cage, to avoid friction. Thrust bearings are divided into a tight circle and live ring in two parts. Tight circle and sleeve tight, live ring bearing in the bearing housing. Rings and rolling elements commonly used high strength, wear resistance, good bearing steel, surface hardness after quenching should reach HRC60 ~ 65. Cage mostly made of mild steel stamping, copper alloys can also be used bakelite cloth or plastic manufacturing